Search found 417 matches

by KevinA
10 Jan 2016, 23:08
Forum: Basic Schematic and PCB Design
Topic: Help a little shy
Replies: 4
Views: 4842

Re: Help a little shy

Thanks for the tip on pad sizing and sorry for the confusion over whom I was speaking to. One thing I noticed is your pattern matches the mechanical part and I've done that more than a few times. http://aaes.us/diptrace/diptrace055.jpg I added .375+.1*2-5.2 to get 4.25 for the inner and .475+.1*2-3....
by KevinA
03 Jan 2016, 14:49
Forum: Bug reports
Topic: 3D View missing clearance
Replies: 0
Views: 7192

3D View missing clearance

I don't know that it's a bug or just not part of the view criteria: dt_rz.jpg The PCB layout: dt_rz1.jpg You can see the clearance around the mounting holes in the PCB layout but not in the 3D view In the Pattern Editor the 3D view shows the mounting pegs of the connector but the PCB 3D view does no...
by KevinA
03 Jan 2016, 10:46
Forum: Bug reports
Topic: Pattern wrong in Connectors
Replies: 5
Views: 7206

Re: Pattern wrong in Connectors

To avoid interference fit, I would add 0.1mm clearance around the pegs , while the pegs is 1.12mm in diameter , so i would give the hole size of 1.3mm. That was weird, I had set it at 1.25mm using the model. Where did you find the 1.12mm number? The PDF I have, ItemDetail_1725656.pdf, was generated...
by KevinA
03 Jan 2016, 10:35
Forum: Feature requests
Topic: Component Editor suggestion
Replies: 0
Views: 7565

Component Editor suggestion

Could you please allow the Pin manager to be 'Sticky': Type, Electric, Show Names should remember the last selection and stay, or 'Sticky'. Rearrange the box order: Name -> Type-> Electric-> Show Name and then a NEXT button that can be activated with a keyboard short cut so we DON'T have to stop typ...
by KevinA
03 Jan 2016, 10:15
Forum: Off-topic
Topic: 433MHZ JAMMER
Replies: 8
Views: 25875

Re: 433MHZ JAMMER

In the US jamming Radio Frequency devices is not legal. Most high end 'drones' here use 2.4Mhz as in "Devo F12E 12-channel 2.4GHz Direct Sequence Spread Spectrum transmitter with built-in 32 channel dual antenna FPV receiver for 5.8GHz telemetry" Some controllers allow you to switch out the transmit...
by KevinA
02 Jan 2016, 19:37
Forum: Bug reports
Topic: Pattern wrong in Connectors
Replies: 5
Views: 7206

Pattern wrong in Connectors

None of the Phoenix connectors had 3D data, I found the site and learned how to read Dutch then located the STEP 3D. When I imported the 3D I discovered mounting holes are needed for the 2 and 3 place terminal blocks. Pattern: TB-1x2/2.54/6x6/Sc_H 1725656 Funny thing is the drawings did not give a d...
by KevinA
02 Jan 2016, 15:25
Forum: Making Libraries in DipTrace
Topic: Import DXF pattern
Replies: 4
Views: 6996

Re: Import DXF pattern

Thanks @MonGater
It's not a fast learning process but at least I've finally figured out, sort of, the Libraries and moving patterns/components around.
by KevinA
02 Jan 2016, 15:02
Forum: Basic Schematic and PCB Design
Topic: Style: Free
Replies: 2
Views: 4617

Style: Free

Not quite sure about all of your questions, but Pad Spacing and Line Spacing are referenced to pad origins (centers). Pad Width and Height are referenced to a pad's outline (outside dimensions). Does the following illustration help?... Your example is my next issue, I copied a SOP-8/6.35X1.27 to my...
by KevinA
02 Jan 2016, 14:22
Forum: Basic Schematic and PCB Design
Topic: Help a little shy
Replies: 4
Views: 4842

Re: Help a little shy

I should have been a little clearer: BOSCH BMF055 https://ae-bst.resource.bosch.com/media/products/dokumente/bmf055/BST_BMF055_DS000_01.pdf They seem to like strange. Weird QUAD with strange pin 1. They call it a Standard LGA I didn't think so since the horizontal and vertical pins were different si...
by KevinA
26 Dec 2015, 20:35
Forum: Basic Schematic and PCB Design
Topic: Help a little shy
Replies: 4
Views: 4842

Help a little shy

Trying to use the Pattern Editor has been, lets say a learning experience. In the Pattern Template windows with Lines selected I have 2 lines of 4 pads, the pad spacing (PITCH I hope) is .65 but the line spacing, what can I say. Is this the spacing between the two lines of pads to: 1. the inside of ...