Hi everyone. I'm a newer Diptrace user, having used Eagle for 20+ years. When I upload my gerber files to Oshpark, I will often get the following message after the files are processed:
Correcting drill zero suppression. Please verify drills align correctly.
My issue is, I can't seem to figure out what's causing it. When I convert the board to Eagle format, I don't get the message. Also, it doesn't seem to be an issue with the part itself, which is pretty simple.
I've attached the following test projects:
T002A.zip - This contains the gerbers and dip file that's generating the message.
T003A.zip - This project uses the same Teensy 3.2 part, but doesn't generate the message.
Any thoughts or direction on what I'm doing incorrectly?
Thanks,
Dave
Oshpark error: Correcting drill zero suppression. Please verify drills align correctly.
Re: Oshpark error: Correcting drill zero suppression. Please verify drills align correctly.
I still get this error on about half the boards I submit. Does anyone know what I might be doing wrong?
-
- Posts: 9
- Joined: 26 Feb 2015, 11:04
Re: Oshpark error: Correcting drill zero suppression. Please verify drills align correctly.
I'm not sure how to fix this or indeed if it's really an error or just a warning?
Have you checked out the DipTrace help pages on OSHpark? https://docs.oshpark.com/design-tools/diptrace/
Also this is a very useful tutorial by idyL.io: https://idyl.io/diptrace-design-your-pc ... hpark-com/
Phil.
Have you checked out the DipTrace help pages on OSHpark? https://docs.oshpark.com/design-tools/diptrace/
Also this is a very useful tutorial by idyL.io: https://idyl.io/diptrace-design-your-pc ... hpark-com/
Phil.