Sheet size in Sheet Template

For general questions regarding the software and for all questions that do not fit in any of the threads above.
Post Reply
Message
Author
User avatar
OldNortonBoy
Posts: 37
Joined: 11 Oct 2016, 10:04
Location: NSW, Australia

Sheet size in Sheet Template

#1 Post by OldNortonBoy » 16 Mar 2020, 23:26

Hi All
I have created some A5 Templates from the original A4 Templates by going into File\Title and Sheet Setup and changing the Width and Height.
How do I ADD the new paper size to Sheet Size in the File\Title and Sheet Setup\Sheet Template\Border and Size Tab\Sheet Size?

Any help
Thanks
Mike
Mike

Tomg
Expert
Posts: 2028
Joined: 20 Jun 2015, 07:39

Re: Sheet size in Sheet Template

#2 Post by Tomg » 17 Mar 2020, 15:12

Hi Mike,
Here is one procedure which seems to work at the moment (could be wrong, though)...
1) Open the Titles and Sheet Setup dialog window, make sure "None" is selected in the Sheet Template: drop-list, click on the [Border and Size] tab and enter the desired dimensions for your new sheet template.
2) Click on the [Title Blocks] tab and select/set-up the needed title block.
3) Once you have finished designing a new template, click on the Edit Sheet Templates button [...] to bring up the Sheet Templates dialog window.
4) In the Sheet Templates dialog window click on the [+] button to create a new template name. It's default name will be "New". Click on the name "New" at the bottom of the templates list to display it in the Name: box.
5) In the Name: box type in a new name such as "A5 (Landscape)" and close the Sheet Templates dialog window by clicking on the "X" in its upper-right corner.
6) Back in the Titles and Sheet Setup dialog window you should find your new template at the bottom of the Sheet Template: drop-list. Select it to make sure all of your settings have been retained.
7) Click on OK.

Be warned that one of the characteristics of the current DipTrace title block tool is seeing your custom templates disappear whenever DipTrace is re-installed or upgraded.
Good luck.
Tom

byersert
Posts: 1
Joined: 23 Nov 2022, 10:00

Re: Sheet size in Sheet Template

#3 Post by byersert » 23 Nov 2022, 23:50

hi,

Here is a method that appears to be effective at the time...
1) To create a new sheet template, open the Titles and Sheet Setup dialog window, ensure "None" is chosen in the Sheet Template: drop-list, click the [Border and Size] tab, and then input the required measurements.

2) Select or configure the required title block by clicking the [Title Blocks] tab.
3) Click the Edit Sheet Templates button  to open the Sheet Templates dialog box when you've done creating a new template.
4) To name a new template, click the  button in the Sheet Templates dialog box. It will have the name "New" by default. At the bottom of the list of templates, select "New."
5) Click the "X" in the upper-right corner of the Sheet Templates dialog window to close it after entering a new name, such as "A5 (Landscape)," in the Name: box.
6) Returning to the Titles and Sheet Setup dialog window, you should locate your new template in the Sheet Template: drop-list at the bottom. To confirm that all of your settings have been kept, select it.Select OK.
inhsallah it will be helped full to you.
Buy Bed Sheets Online In Australia @ Wholesale Prices from ClicknBuyAustrlaia.

licensefairly
Posts: 5
Joined: 18 Dec 2022, 15:00

Re: Sheet size in Sheet Template

#4 Post by licensefairly » 17 Feb 2023, 22:25

byersert wrote: 23 Nov 2022, 23:50 hi,

Here is a method that appears to be effective at the time...
1) To create a new sheet template, open the Titles and Sheet Setup dialog window, ensure "None" is chosen in the Sheet Template: drop-list, click the [Border and Size] tab, and then input the required measurements.

2) Select or configure the required title block by clicking the [Title Blocks] tab.
3) Click the Edit Sheet Templates button  to open the Sheet Templates dialog box when you've done creating a new template.
4) To name a new template, click the  button in the Sheet Templates dialog box. It will have the name "New" by default. At the bottom of the list of templates, select "New." penalty kick online
5) Click the "X" in the upper-right corner of the Sheet Templates dialog window to close it after entering a new name, such as "A5 (Landscape)," in the Name: box.
6) Returning to the Titles and Sheet Setup dialog window, you should locate your new template in the Sheet Template: drop-list at the bottom. To confirm that all of your settings have been kept, select it.Select OK.
inhsallah it will be helped full to you.
Very detail. I applied and the situation improved quite a lot.

Post Reply