I want to ask if the following circuit is feasible. The load current is about 100mA. I have read the LM1117 manual (https://www.utmel.com/components/lm1117 ... ets?id=144) and seen that the input and output terminals are connected with 10uF tantalum capacitors. Is it reasonable for me to use this large electrolytic capacitor instead? Whether the output terminal should not be connected to 0.1uF, I think this voltage regulator block seems to require the capacitor ESR to be 0.3-22R.
For general questions regarding the software and for all questions that do not fit in any of the threads above.
1 post • Page 1 of 1