Preparing files for JLCPCB

Short reviews which describe implemented features here.
Post Reply
Message
Author
Serg
Technical Support
Posts: 519
Joined: 09 Jun 2010, 01:12

Preparing files for JLCPCB

#1 Post by Serg » 05 Jan 2022, 23:20

This video shows how to prepare the files for PCB and assembly orders in JLCPCB.

The more details are here:
https://support.jlcpcb.com/article/80-b ... t-assembly
https://support.jlcpcb.com/article/79-p ... t-assembly
https://support.jlcpcb.com/article/140- ... n-diptrace

In BOM, check the following:
- necessary columns - Value, RefDes, Pattern;
- optional column - Part Number (LCSC);
- in the text editor, rename Value to Comment;
- in the text editor, rename RefDes to Designator;
- in the text editor, rename Pattern to Footprint;
- "Column Divider" is comma;
- "Quotation Marcs for Values" is set.
BOM.png
BOM.png (22.45 KiB) Viewed 2213 times
BOM and PP.png
BOM and PP.png (2.62 KiB) Viewed 2213 times

In Pick and Place, check the following:
- necessary columns - Refdes, Center X, Center Y, Side, Rotate;
- in the text editor, rename Center X to Min X;
- in the text editor, rename Center Y to Min Y;
- "Decimal Separator" is point;
- units is mm;
- "Column Divider" is comma;
- "Quotation Marcs for Values" is set.
Pick and Place.png
Pick and Place.png (22.21 KiB) Viewed 2213 times
BOM and PP.png
BOM and PP.png (2.62 KiB) Viewed 2213 times


Also, JLCPCB explains how to fix the possible Rotation Problem:

Rotation Problem.png
Rotation Problem.png (354.65 KiB) Viewed 2213 times

Mira23
Posts: 2
Joined: 02 May 2023, 14:35

Re: Preparing files for JLCPCB

#2 Post by Mira23 » 01 Oct 2023, 15:04

Serg wrote: 05 Jan 2022, 23:20 This video shows how to prepare the files for PCB and assembly orders in JLCPCB.

The more details are here:
https://support.jlcpcb.com/article/80-b ... t-assembly
https://support.jlcpcb.com/article/79-p ... t-assembly dino game
https://support.jlcpcb.com/article/140- ... n-diptrace

In BOM, check the following:
- necessary columns - Value, RefDes, Pattern;
- optional column - Part Number (LCSC);
- in the text editor, rename Value to Comment;
- in the text editor, rename RefDes to Designator;
- in the text editor, rename Pattern to Footprint;
- "Column Divider" is comma;
- "Quotation Marcs for Values" is set.
BOM.png
BOM and PP.png


In Pick and Place, check the following:
- necessary columns - Refdes, Center X, Center Y, Side, Rotate;
- in the text editor, rename Center X to Min X;
- in the text editor, rename Center Y to Min Y;
- "Decimal Separator" is point;
- units is mm;
- "Column Divider" is comma;
- "Quotation Marcs for Values" is set.
Pick and Place.png
BOM and PP.png



Also, JLCPCB explains how to fix the possible Rotation Problem:


Rotation Problem.png
The instructions are extremely detailed, I watched the video and found it very easy to understand

Post Reply