No "PORT8" component?

Drawing Schematics, Hierarchical Design, BOM, Exporting net-lists, etc.
Post Reply
Message
Author
rustygutter
Posts: 4
Joined: 28 Jun 2018, 07:48

No "PORT8" component?

#1 Post by rustygutter » 13 Jul 2018, 04:04

Total newbie here, still going through the tutorial. In section 5.1.2 "Net Ports" of the tutorial, I am instructed to find and place the PORT8 component from the Net Ports library. But there is no "PORT8" in the Net Ports library on my computer!? Is this a component I should have manually created earlier in the tutorial (I skipped the section on Creating Component Libraries).
I'm using v3.2 (full, licensed version). I even installed the eval version on another PC to see if maybe I had a bad install (nope).

So my question is: Why can I not find the 'PORT8' component shown in the tutorial? Is the tutorial wrong? (I do see 'Bus_Port_In8' and 'Bus_Port_Out8' -- are these replacements for 'PORT8'?)

Thanks!
Ted

Alex
Technical Support
Posts: 3897
Joined: 13 Jun 2010, 23:43

Re: No "PORT8" component?

#2 Post by Alex » 16 Jul 2018, 01:46

Hi Ted,

We replaced PORT8 in old libraries with Bus_Port_In8 and Bus_Port_Out8 ports in new libraries. We just need to update the tutorial, thank you for the information.

Post Reply