Page 1 of 1

Marking pins as no-connect?

Posted: 12 Sep 2018, 17:46
by doug12745
On schematic diagrams, is there a method to mark unused pins as "no connects"? Some schematic editors have a place item (usually X) which is placed on the unused connector. That way the verification should know not to mark them as errors.

Re: Marking pins as no-connect?

Posted: 12 Sep 2018, 19:22
by farley
Yes, there is a method to mark a pin as having "no connects":
viewtopic.php?f=3&t=9877&hilit=no+connect