Erase/Remove a Title Block?

Drawing Schematics, Hierarchical Design, BOM, Exporting net-lists, etc.
Post Reply
Message
Author
doug12745
Posts: 17
Joined: 10 Sep 2018, 17:24

Erase/Remove a Title Block?

#1 Post by doug12745 » 13 Sep 2018, 15:29

I'm coming along fine with the evaluation of DipTrace. I'm now trying to work with TitleBlocks. I placed a title block and now want to change it to another. I cannot seem to find how to erase or delete a title block. How does one do this?

dtu2
Expert
Posts: 197
Joined: 20 Jan 2012, 10:50

Re: Erase/Remove a Title Block?

#2 Post by dtu2 » 13 Sep 2018, 17:30

It would be a good idea to back up your pagestand.dat and stamps.dat file before you proceed:

To change to another title block:
1) Open Schematic Capture
2) Click on File>Titles and Sheet Setup...
3) In the Title Blocks tab: Select a new title block in whatever location you choose.

To completely Delete a title block for good (this can't be undone):
1) Open Schematic Capture
2) Click on File>Titles and Sheet Setup...
3) In the Border and Size tab: Select the 'Title Block Editor'
4) Highlight the title block you intend to delete. You may wish to click on Preview at this point to make sure you have the correct title block selected.
5) Click on Delete and then OK
Jeff

Post Reply