Hello!
Is it available to check buses for single nets?
Bus ERC
Re: Bus ERC
Please clarify what error do you want to catch by ERC. A bus with single net is not error I think.
Re: Bus ERC
Sure this is not an electrical error. But it can be a logical error when a designer forgets to include a paired net in the bus. Especially when there are many nets in the bus and they are on different sheets. At least in P-CAD, a single occurrence of the net in the bus is monitored.
Re: Bus ERC
There is "Nets with Single Pin" option in ERC setup. If enabled, it should verify all nets including those connected to buses.
Re: Bus ERC
Sorry, not at all. This only happens if the net is actually connected to only one pin, but this is a rare occurrence.
Please look at the net PCH3 If I forget to connect this net from the bus to any other component, I would have a PCB with trouble.
Maybe it would be useful if window Bus Nets will contain a number of connections any net to this bus.
Please look at the net PCH3 If I forget to connect this net from the bus to any other component, I would have a PCB with trouble.
Maybe it would be useful if window Bus Nets will contain a number of connections any net to this bus.
Re: Bus ERC
Thank you for the clarification. We will consider an option to check buses for single nets.