Route-Keepout Not Working V3.3.1.3

Making PCB Layouts, Manual routing, Auto-routing, Copper pouring, Updating from Schematic, Manufacturing Output
Post Reply
Message
Author
cleberdrums
Posts: 12
Joined: 17 Oct 2016, 04:46

Route-Keepout Not Working V3.3.1.3

#1 Post by cleberdrums » 26 Jun 2019, 10:28

...


I make circle and square type route Keepout, but don't appears in 3D and Gerber files. What are i make wrong, see the print screen.

routUntitled.png
routUntitled.png (6.09 KiB) Viewed 382 times
keepUntitled.png
keepUntitled.png (43.2 KiB) Viewed 382 times
3dUntitled.png
3dUntitled.png (21.72 KiB) Viewed 382 times
Before in other version works fine and in this version dont work.

Someone can help me please a need urgency



Look in other version the fiducials works fine
3d_fUntitled.png
3d_fUntitled.png (24.43 KiB) Viewed 382 times
3dUntitled.png
3dUntitled.png (44.98 KiB) Viewed 382 times

farley
Posts: 157
Joined: 15 Sep 2011, 09:28

Re: Route-Keepout Not Working V3.3.1.3

#2 Post by farley » 26 Jun 2019, 12:00

You're not doing anything wrong. Route keepout shapes are used during trace routing to keep pours and traces away from areas the layout designer designates. They are not part of the manufacturing output.

cleberdrums
Posts: 12
Joined: 17 Oct 2016, 04:46

Re: Route-Keepout Not Working V3.3.1.3

#3 Post by cleberdrums » 01 Jul 2019, 06:03

Ok, But why the U1 on the screen have a green Bright color, appears in 3D and Geber, and i make the same rules to fiducials.

cleberdrums
Posts: 12
Joined: 17 Oct 2016, 04:46

Re: Route-Keepout Not Working V3.3.1.3

#4 Post by cleberdrums » 01 Jul 2019, 07:02

Because i need put route-keepout edge of hole, without outer diameter, for solder an inverted led.

cleberdrums
Posts: 12
Joined: 17 Oct 2016, 04:46

Re: Route-Keepout Not Working V3.3.1.3

#5 Post by cleberdrums » 01 Jul 2019, 09:33

I resolve putting a pad in bottom side and put a custom paste mask shrink. works fine.


Thanks

shital1896
Posts: 2
Joined: 02 Jul 2019, 01:12
Location: New York, NY 10017
Contact:

Re: Route-Keepout Not Working V3.3.1.3

#6 Post by shital1896 » 02 Jul 2019, 01:16

I make a circle and square type route Keepout but don't appear in 3D and Gerber files. What am I make wrong, see the print screen? routUntitled.png.

Post Reply