Verification error on 7805 output

Drawing Schematics, Hierarchical Design, BOM, Exporting net-lists, etc.
Post Reply
Message
Author
spinnaker
Posts: 53
Joined: 31 Oct 2012, 15:08

Verification error on 7805 output

#1 Post by spinnaker » 23 Jan 2019, 16:03

I am getting the following verification error on the output of a 7805.
Capture2.PNG
Capture2.PNG (6.24 KiB) Viewed 415 times
What does it mean? How do I properly add a 7805 output as the supply for the rest of my project?

P.S. The power supply part of the schematic is on its own sheet.
Capture.PNG
Capture.PNG (6.97 KiB) Viewed 415 times

DevilMKD
Posts: 23
Joined: 09 Dec 2013, 01:12
Location: Macedonia

Re: Verification error on 7805 output

#2 Post by DevilMKD » 24 Jan 2019, 00:30

The issue is with the +5V net port, its pin is defined as output, and you have the 7805 pin as output, you can right click the pin of the +5V net port and change it to something else (see images)
It will remove the issue.
1.png
1.png (15.28 KiB) Viewed 408 times
2.png
2.png (16.6 KiB) Viewed 408 times
3.png
3.png (20.82 KiB) Viewed 408 times
PCB designs and Product development are my everyday life.

spinnaker
Posts: 53
Joined: 31 Oct 2012, 15:08

Re: Verification error on 7805 output

#3 Post by spinnaker » 24 Jan 2019, 02:38

Thanks! That did it. :)

Post Reply