Net exisits on Schematic, removed in PCB, replaced with other net

Making PCB Layouts, Manual routing, Auto-routing, Copper pouring, Updating from Schematic, Manufacturing Output
Post Reply
Message
Author
jgmdesigns
Posts: 66
Joined: 19 Oct 2012, 02:09

Net exisits on Schematic, removed in PCB, replaced with other net

#1 Post by jgmdesigns » 26 Feb 2020, 03:14

Hey all,
I finished my schematic and have begun to lay out my PCB, but I have a nagging issue that I hope someone has a fix for.

I have a power in and a ground coming in on a connector. In the Schematic, the Ground is Net 3 and power is Net22. All good there, but when I ernew the layout from teh schematic, Net 22 is not there and everything that was connected to Net 22 is now connected to Net 3!

How does this happen? How do I fix it?

JIm
Top
jgmdesigns
Posts: 66
Joined: 19 Oct 2012, 02:09

Re: Net exisits on Schematic, removed in PCB, replaced with other net

#2 Post by jgmdesigns » 26 Feb 2020, 03:53

Problem Found!

It seems that I must have connected the two nets inside the pattern for the Connector that the NETS were connected to.

Sorry for this.

JIm
Top
Post Reply

Return to “DipTrace PCB Layout”