Kicad schematic import grid settings

[infinitemach]

I imported a Kicad 8 schematic into DipTrace 5 and all the parts and wires are snapped to a 0.635 grid, even though the Diptrace grid size is 1.27mm.

Is there a problem with changing the grid size to 0.635 so that any wires and parts that I add will properly connect?

[infinitemach]

I was able to get everything lined up by switching to a 0.635mm grid, selecting the entire sheet, and moving up 1 and left 1. Then I changed the grid back to 1.27mm