Invalid .step file import into SolidWorks

Report bugs here
Post Reply
Message
Author
vamap
Posts: 8
Joined: 02 Apr 2019, 08:48

Invalid .step file import into SolidWorks

#1 Post by vamap » 29 Apr 2019, 14:00

DipTrace\models3d\DIP\dip-8.step and other DIP .step doesn't correct import to solidworks.
It is noteworthy that separately "bad" .step DIP files are imported correctly.
2.JPG
1.JPG
You do not have the required permissions to view the files attached to this post.

vamap
Posts: 8
Joined: 02 Apr 2019, 08:48

Re: Invalid .step file import into SolidWorks

#2 Post by vamap » 30 Apr 2019, 07:00

It's the same problem in Kompas 3d.
3.JPG
You do not have the required permissions to view the files attached to this post.

AnushVishwanath
Posts: 1
Joined: 04 Aug 2019, 05:09

Re: Invalid .step file import into SolidWorks

#3 Post by AnushVishwanath » 09 Aug 2019, 04:22

To fix the file try the following:
1.Deactivate “3D Interconnect” in SOLIDWORKS Options > System Options > Import
2.Open the STEP file using text editor such as Notepad. The file will open as text.
3.Use Search/Find, and search for: PRESENTATION_STYLE_ASSIGNMENT
If this problematic data is found, replace it using the Search/Find & Replace command with: PRES
4.Save the file. This parameter will now be skipped during the import’s parsing process, and thus the warning will not display and the STEP should import as expected.
5. Retry the Import into SOLIDWORKS.
exact detail steps, pls click: https://docsbay.net/how-to-fix-encounte ... -step-file

Post Reply