Zig-Zag pattern issues 3.x~4.x

Making your own components and patterns, organizing and using libraries.
Post Reply
Message
Author
User avatar
KevinA
Posts: 476
Joined: 18 Dec 2015, 15:35

Zig-Zag pattern issues 3.x~4.x

#1 Post by KevinA » 18 Mar 2020, 15:04

I had to create a pattern for Sullins NPPN101BFLC-RC SMD 10 pin 2mm pitch connector, the Zig-Zag style seemed to work but the pad spacing is half of what was needed.
zz2.jpg
You do not have the required permissions to view the files attached to this post.

Tomg
Expert
Posts: 1544
Joined: 20 Jun 2015, 14:39

Re: Zig-Zag pattern issues 3.x~4.x

#2 Post by Tomg » 18 Mar 2020, 15:49

The Pattern Template tool's Pad Spacing setting refers to the pads that exist on the same line. It looks like your pattern should be vertically flipped for the BFLC.
Tom

User avatar
KevinA
Posts: 476
Joined: 18 Dec 2015, 15:35

Re: Zig-Zag pattern issues 3.x~4.x

#3 Post by KevinA » 22 Mar 2020, 00:36

I finally finished the part, had to draw the 3D image since for some reason there is not a SMD HDRF 2mm X 10 position image anywhere I could find. The vendor provided an image of his product, Cellular modem:
shield2.jpg
shield1.jpg
You do not have the required permissions to view the files attached to this post.

Post Reply