I want to display Via Land.

[owho1982]

I'd like to output the lands of via lands and holes in Gerber. I imported the file as a DXF, filled the copper, then imported the vias as pad holl and outputted them in Gerber. However, only the holes are displayed, not the lands. I'd like to display the lands in Gerber as well. Also, is it possible to draw vias by following the lines?

[Serg]

I'd like to output the lands of via lands and holes in Gerber. I imported the file as a DXF, filled the copper, then imported the vias as pad holl and outputted them in Gerber. However, only the holes are displayed, not the lands. I'd like to display the lands in Gerber as well. Also, is it possible to draw vias by following the lines?

Check the settings in the Gerber export window. Select the appropriate signal layer and the checkboxes in the Objects field. If the issue cannot be resolved, please send the file and a description of the problem to our technical support at:
https://diptrace.com/support/request-support/
We will help you sort it out.